Faux finishing/color washing
Diamond honed or substantially sanded surfaces
Additional holes in surface
Built in drain boards- starting at

Additional options - if not already part of estimate

Site Prerequisites ( for client and/or contractor)

• Contractor or owner is required to supply and install substrate as per included drawing.
• Minimum substrate overhang ½ beyond face frame or cabinet box. Cement extends 3/4 beyond substrate above surface and ½ beyond substrate edge.
• Wherever appliances or other fixtures interrupt counter runs, plywood shall be held back ¼ minimum to allow for pouring over end grain of plywood.
• All appliances must be on site prior to our arrival for installation.
• Surfaces that are not uniform and level within ¼ per 6' will be bid separately to bring within required tolerances.
• Wood surfaces- to be finished- must have paint , lacquer, or sealer. No unfinished wood in the work area. Cement and water will damage unfinished wood. CE is not responsible for any damage related to unfinished wood in the work area.
• The permanent light fixtures in work area must be connected and working prior to our finishing the cement. This includes under cabinet lighting, can lights, hood lights, etc.

Counters, hearths, mantles, tub decks

CEI Required Working Conditions

• No other sub-contractors are to be in our area during our scheduled time for installation, this is not negotiable.
• Our raw materials require temperatures between 65-80 degrees to be most effective. Some type of HVAC must be available and operating 24 hours before start of work by the contractor or client to meet this if needed. The project otherwise may have to be rescheduled.
• Power, water, and a mixing area available within 100 feet of work area.

General Conditions

• Discrepancies between drawings that bids are made from and actual site conditions may incur extra costs.
• All masking and protection installed by CE must remain in place for the duration of our presence on site. If we must reinstall masking there is a $60.00 per hour charge.
• All surfaces provided by CE include extra low-gloss finish unless otherwise specified.
• Tub decks are poured to the edge of the rough opening so that the flange of the tub will overlap the cement.
• All tubs and sinks will be caulked in with urethane caulking to match the color of the cement as closely as possible.
• Due to the fact that our product is hand crafted, each project can exhibit some irregularity in size, surface and finish which should be expected as inherent character and beauty.

In each of our professional relationships, Cement Elegance  works to ensure that client needs and expectations are satisfactorily fulfilled.  Experience has shown us that key components in a successful and well-executed project are clear and proactive communication, and mutual understanding and agreement regarding job specifications, costs and requirements. 

To that end, Cement Elegance has established a simple and straightforward process at the start of each job. We believe you will find it provides you and your clients with a clear and confident understanding of the work to be done, the costs involved, and how changes can be executed.

Floors- substrate conditions

• Fully cured concrete (30 days after pour)
• ¾ T&G plywood glued and screwed.
• 1 1/8 T&G plywood
• Surface swept and vacuumed
• Surfaces that are not uniform and level within ¼ per 6' will be bid separately for additional material cost to compensate.
• Gaps/cracks in floor in excess of 1/8 must be filled prior to our arrival on site. Prep charges otherwise may be necessary.
• Baseboards and casing must be removed or not yet installed. If baseboards or casings are installed at the time of pouring they will be trapped behind the cement and impossible to remove without damage.

Estimates

Upon approval by signature of the estimate both Client and Cement Elegance, Inc. agree to the scope of project and pricing established. This is based on information supplied to Cement Elegance, Inc. by the Client. Any discrepancies between this information and the actual site conditions may incur additional costs.

Rates

Client shall pay Cement Elegance, Inc. an amount based on Client approved estimates. The fee may be adjusted in accordance with the factors in Article 3 of the Code of Fair Practice. Client shall be responsible for making additional payments based on Client approved change orders.

Scheduling

Once a time for installation is agreed to, Cement Elegance, Inc. will make all reasonable efforts possible to maintain ability to proceed on that date. Cement Elegance, Inc. is not responsible for any losses incurred due to our inability to make a scheduled date. If project is postponed or delayed by the Client, Cement Elegance, Inc., will reschedule the project for the available date. Cement Elegance will notify the Client as soon as any change in schedule is known.

Change Orders

Any addition or change to the scope of work will require a Change Order. Once signed, the Change Order falls under the same terms and conditions as written here. Depending on the scope of the Change Order, projected completion dates may be affected.

Payment

Default of Payment

a. Deposits : It is the rule of Cement Elegance, Inc. that no project is formally scheduled until a deposit of 50% of estimated project charges is received along with all signed supporting documents.

b. Progress Payments : Depending on the size and time frame associated with a given project, Cement Elegance may request a progress payment for consistency in cash flow.

c. Upon completion : Cement Elegance requires payment in full upon completion unless renegotiated otherwise in writing at least two weeks prior to completion date ( Completion date is the point at which the work is suitable for it's intended use). Client may hold back up to $500.00 for final walk through and punch list completion. Final payment is due within 15 days of punch list completion.

The client shall assume responsibility for all collection and legal fees necessitated by default in payment.

Expenses

Client shall be responsible for payment of all extra expenses rising from assignment including but not limited to Photostats, mailings, messengers, shipping charges & insurance, and travel.